Setup Textpattern CMS on Ubuntu 16.04 / 17.10 / 18.04 with Nginx, MariaDB, PHP 7.2 and Let’s Encrypt SSL/TLS Certificates

For those who don’t know, Textpattern has been around for a very long time… It’s an elegant and lightweight content management system which is an alternative to WordPress and other popular CMS in use today…

If you’re a current WordPress user and wish to try another CMS, give Textpattern a try and see if it fits your needs… It’s based on the same LAMP or LEMP stack as WordPress so the technology shouldn’t be much different than what you already know…

This brief tutorial shows students and new users how to install Textpattern CMS on Ubuntu 16.04 / 17.10 and 18.04 LTS with Nginx, PHP 7.2 support and Let’s Encrypt free SSL/TLS certificates enabled…

When you’re ready to get Textpattern working, continue with the steps below:

Step 1: Install Nginx HTTP Server

Nginx HTTP Server is the most popular web server in use… so install it, since Textpattern needs it..

To install Nginx HTTP on Ubuntu server, run the commands below…

sudo apt update
sudo apt install nginx

After installing Nginx, the commands below can be used to stop, start and enable Nginx service to always start up with the server boots.

sudo systemctl stop nginx.service
sudo systemctl start nginx.service
sudo systemctl enable nginx.service

To test Nginx setup, open your browser and browse to the server hostname or IP address and you should see Nginx default test page as shown below.. When you see that, then Nginx is working as expected..

http://localhost

nginx default home page test

Step 2: Install MariaDB Database Server

MariaDB database server is a great place to start when looking at open source database servers to use with Magento… To install MariaDB run the commands below…

sudo apt-get install mariadb-server mariadb-client

After installing MariaDB, the commands below can be used to stop, start and enable MariaDB service to always start up when the server boots..

Run these on Ubuntu 16.04 LTS

sudo systemctl stop mysql.service
sudo systemctl start mysql.service
sudo systemctl enable mysql.service

Run these on Ubuntu 17.10 and 18.04 LTS

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

After that, run the commands below to secure MariaDB server by creating a root password and disallowing remote root access.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

  • Enter current password for root (enter for none): Just press the Enter
  • Set root password? [Y/n]: Y
  • New password: Enter password
  • Re-enter new password: Repeat password
  • Remove anonymous users? [Y/n]: Y
  • Disallow root login remotely? [Y/n]: Y
  • Remove test database and access to it? [Y/n]:  Y
  • Reload privilege tables now? [Y/n]:  Y

Restart MariaDB server

To test if MariaDB is installed, type the commands below to logon to MariaDB server

sudo mysql -u root -p

Then type the password you created above to sign on… if successful, you should see MariaDB welcome message

mariadb welcome

Step 3: Install PHP 7.2-FPM and Related Modules

PHP 7.2 isn’t available on Ubuntu default repositories… in order to install it, you will have to get it from third-party repositories.

Run the commands below to add the below third party repository to upgrade to PHP 7.2-FPM

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2-FPM

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2-fpm php7.2-common php7.2-mbstring php7.2-xmlrpc php7.2-soap php7.2-mysql php7.2-gd php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open PHP default config file for Nginx…

sudo nano /etc/php/7.2/fpm/php.ini

Then make the changes on the following lines below in the file and save. The value below are great settings to apply in your environments.

file_uploads = On
allow_url_fopen = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
cgi.fix_pathinfo = 0
date.timezone = America/Chicago

After making the change above, save the file and close out.

Step 3: Restart Nginx

After installing PHP and related modules, all you have to do is restart Nginx to reload PHP configurations…

To restart Nginx, run the commands below

sudo systemctl restart nginx.service

Step 4: Create Magento Database

Now that you’ve installed all the packages that are required for Magento to function, continue below to start configuring the servers. First run the commands below to create a blank Magento database.

To logon to MariaDB database server, run the commands below.

sudo mysql -u root -p

Then create a database called Textpattern

CREATE DATABASE textpattern;

Create a database user called textpatternuser with new password

CREATE USER 'textpatternuser'@'localhost' IDENTIFIED BY 'new_password_here';

Then grant the user full access to the database.

GRANT ALL ON textpattern.* TO 'textpatternuser'@'localhost' IDENTIFIED BY 'user_password_here' WITH GRANT OPTION;

Finally, save your changes and exit.

FLUSH PRIVILEGES;
EXIT;

Step 5: Download and Install Textpattern

Run the commands below to download Textpattern latest… Then create a root director for Textpattern and unzip the content there…

cd /tmp && wget https://textpattern.com/file_download/75/textpattern-4.6.2.zip
sudo unzip textpattern-4.6.2.zip
sudo mv textpattern-4.6.2 /var/www/html/textpattern

Next, run the commands below to change the root folder permissions…

sudo chown -R www-data:www-data /var/www/html/textpattern/
sudo chmod -R 755 /var/www/html/textpattern/

Step 6: Configure Nginx Textpattern Site

Finally, configure Nginx configuration file for Textpattern. This file will control how users access Textpattern content. Run the commands below to create a new configuration file called textpattern

sudo nano /etc/nginx/sites-available/textpattern

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

erver {
    listen 80;
    listen [::]:80;
    root /var/www/html/textpattern;
    index  index.php index.html index.htm;
    server_name  example.com www.example.com;

     client_max_body_size 100M;

    location / {
        try_files $uri $uri/ /index.php?$args;
    }

    location ~ \.php$ {
         include snippets/fastcgi-php.conf;
         fastcgi_pass unix:/var/run/php/php7.2-fpm.sock;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
         include fastcgi_params;
    }
}

Save the file and exit.

After configuring the VirtualHost above, enable it by running the commands below

Step 7: Enable the Textpattern Site

After configuring the VirtualHost above, enable it by running the commands below, then restart Nginx server…

sudo ln -s /etc/nginx/sites-available/textpattern /etc/nginx/sites-enabled/

Step 8: Install Let’s Encrypt Client

To get Let’s Encrypt free SSL/TLS certificates on your Ubuntu machine, you should first install its client. The client helps automate the process for you. To install it, run the commands below.

sudo apt-get install python-certbot-nginx

If python-certbot-nginx isn’t already installed, you may have to add its PPA repository and install the package..

sudo add-apt-repository ppa:certbot/certbot
sudo apt-get update
sudo apt-get install python-certbot-nginx

Step 9: Obtaining your free SSL/TLS Certificates

After installing Let’s Encrypt Certbot client module for Nginx, run the commands below to obtain your free Let’s Encrypt SSL/TLS certificate the domain specified… make sure to replace example.com with your own domain..

sudo certbot --nginx -m admin@example.com -d example.com -d www.example.com

After running the above commands, you should get prompted to accept the licensing terms. If everything is checked, the client should automatically install the free SSL/TLS certificate and configure the Nginx site to use the certs.

Please read the Terms of Service at
https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf. You must
agree in order to register with the ACME server at
https://acme-v01.api.letsencrypt.org/directory
-------------------------------------------------------------------------------
(A)gree/(C)ancel: A

Choose Yes ( Y ) to share your email address

Would you be willing to share your email address with the Electronic Frontier
Foundation, a founding partner of the Let's Encrypt project and the non-profit
organization that develops Certbot? We'd like to send you email about EFF and
our work to encrypt the web, protect its users and defend digital rights.
-------------------------------------------------------------------------------
(Y)es/(N)o: Y

This is how easy is it to obtain your free SSL/TLS certificate for your Nginx powered website.

Please choose whether or not to redirect HTTP traffic to HTTPS, removing HTTP access.
-------------------------------------------------------------------------------
1: No redirect - Make no further changes to the webserver configuration.
2: Redirect - Make all requests redirect to secure HTTPS access. Choose this for
new sites, or if you're confident your site works on HTTPS. You can undo this
change by editing your web server's configuration.
-------------------------------------------------------------------------------
Select the appropriate number [1-2] then [enter] (press 'c' to cancel): 2

Pick option 2 to redirect all traffic over HTTPS. This is important!

After that, the SSL client should install the cert and configure your website to redirect all traffic over HTTPS.

Congratulations! You have successfully enabled https://example.com and
https://www.example.com

You should test your configuration at:
https://www.ssllabs.com/ssltest/analyze.html?d=example.com
https://www.ssllabs.com/ssltest/analyze.html?d=www.example.com
-------------------------------------------------------------------------------

IMPORTANT NOTES:
 - Congratulations! Your certificate and chain have been saved at:
   /etc/letsencrypt/live/example.com/fullchain.pem
   Your key file has been saved at:
   /etc/letsencrypt/live/example.com/privkey.pem
   Your cert will expire on 2018-02-24. To obtain a new or tweaked
   version of this certificate in the future, simply run certbot again
   with the "certonly" option. To non-interactively renew *all* of
   your certificates, run "certbot renew"
 - If you like Certbot, please consider supporting our work by:

   Donating to ISRG / Let's Encrypt:   https://letsencrypt.org/donate
   Donating to EFF:                    https://eff.org/donate-le

The highlighted code block should be added to your Nginx Textpattern configuration file automatically by Let’s Encrypt certbot. Your Textpattern site is ready to be used over HTTPS.

server {
    listen 80;
    listen [::]:80;
    root /var/www/html/textpattern;
    index  index.php index.html index.htm;
    server_name  example.com www.example.com;

     client_max_body_size 100M;

    location / {
        try_files $uri $uri/ /index.php?$args;
    }

    location ~ \.php$ {
         include snippets/fastcgi-php.conf;
         fastcgi_pass unix:/var/run/php/php7.2-fpm.sock;
         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
         include fastcgi_params;
    }

  listen 443 ssl; # managed by Certbot
    ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem; # managed by Certbot
    ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem; # managed by Certbot
    include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot

    if ($scheme != "https") {
        return 301 https://$host$request_uri;
    } # managed by Certbot

    # Redirect non-https traffic to https
    # if ($scheme != "https") {
    #     return 301 https://$host$request_uri;
    # } # managed by Certbot

}

You’ll have to manually renew the certificates. You’ll get email reminder to reset when the certificates are about to expire. To test the renewal process run the commands below.

sudo certbot renew --dry-run

To setup a process to automatically renew the certificates, add a cron job to execute the renewal process.

sudo crontab -e

Then add the line below and save.

0 1 * * * /usr/bin/certbot renew & > /dev/null

The cron job will attempt to renew 30 days before expiring

After that, open your browser and browse to your domain name to launch Textpattern configuration wizard.

You should see Textpattern setup wizard to complete. Please follow the wizard carefully.

https://example.com/textpattern/setup

You should see Textpattern setup wizard… choose your language and click Submit

textpattern ubuntu install

Next, type in your database connection info you created above… and click Next

textpattern ubuntu

After that you should be prompted to create a new file in the textpattern directory called config.php with the content of your database settings..

textpattern

Run the commands below to create a new file with the content…

sudo nano /var/www/html/textpattern/textpattern/config.php

Then paste the content in the file and save.

<?php
$txpcfg['db'] = 'textpattern';
$txpcfg['user'] = 'textpatternuser';
$txpcfg['pass'] = 'new_password_here';
$txpcfg['host'] = 'localhost';
$txpcfg['table_prefix'] = '';
$txpcfg['txpath'] = '/var/www/html/textpattern/textpattern';
$txpcfg['dbcharset'] = 'utf8mb4';
?>

After that go to the next page and create a new admin account for the backend… then continue..

textpattern ubuntu install

Finally, delete the setup directory and logon.

sudo rm -rf /var/www/html/textpattern/textpattern/setup/

Enjoy!

textpattern ubujntu install

You may also like the post below:

Install AbanteCart on Ubuntu 16.04 / 17.10 / 18.04 with Apache2, MariaDB, PHP 7.2 and Let’s Encrypt SSL/TLS Certificates