Install Snipe-IT on Ubuntu 18.04 | 18.04 with Apache2

laptop 4662049 640

This brief tutorial shows students and new users how to install Snipe-IT Asset Management platform on Ubuntu 18.04 | 16.04 with Apache2 HTTP server.

Snipe-IT is a free, open source IT asset management system written in PHP.

With Snipe-IT, you can manage your IT assets easily with its user-friendly portal, including management of users and security roles.

Whether you’re creating a personal or company asset management platform, Snipe-IT can help you build and manage your content on every device with its intuitive and powerful user and admin dashboard…

For more on Snipe-IT , please visit its home page

To get started with installing Snipe-IT, follow the steps below:

Step 1: Install Apache2 HTTP

Apache2 HTTP Server is the most popular web server in use. so install it since Snipe-IT needs it.

To install Apache2 HTTP on Ubuntu server, run the commands below.

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can be used to stop, start and enable Apache2 service to always start up with the server boots.

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

To find out if Apache2 HTTP server is installed, simply open your web browser and type in the server’s IP or hostname.

When you see the page similar to the one below, then Apache2 is installed and working.


apache2 ubuntu install

Step 2: Install MariaDB Database Server

Snipe-IT also needs a database server to store its content. and MariaDB database server is a great place to start when looking at open source database servers to use with Snipe-IT.

To install MariaDB run the commands below.

sudo apt install mariadb-server mariadb-client

After installing MariaDB, the commands below can be used to stop, start and enable MariaDB service to always start up when the server boots.

Run these on Ubuntu

sudo systemctl stop mariadb.service
sudo systemctl start mariadb.service
sudo systemctl enable mariadb.service

After that, run the commands below to secure MariaDB server by creating a root password and disallowing remote root access.

sudo mysql_secure_installation

When prompted, answer the questions below by following the guide.

  • Enter current password for root (enter for none): Just press the Enter
  • Set root password? [Y/n]: Y
  • New password: Enter password
  • Re-enter new password: Repeat password
  • Remove anonymous users? [Y/n]: Y
  • Disallow root login remotely? [Y/n]: Y
  • Remove test database and access to it? [Y/n]:  Y
  • Reload privilege tables now? [Y/n]:  Y

Restart MariaDB server

To test if MariaDB is installed, type the commands below to logon to MariaDB server

sudo mysql -u root -p

Then type the password you created above to sign on. if successful, you should see MariaDB welcome message

Step 3: Install PHP 7.2 and Related Modules

PHP 7.2 may not be available in Ubuntu default repositories. in order to install it, you will have to get it from third-party repositories.

Run the commands below to add the below third party repository to upgrade to PHP 7.2

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-mysql php7.2-gd php7.2-bcmath php7.2-xml php7.2-cli php7.2-zip php7.2-sqlite

After installing PHP 7.2, run the commands below to open PHP default config file for Apache2.

sudo nano /etc/php/7.2/apache2/php.ini

Then make the changes on the following lines below in the file and save. The value below are great settings to apply in your environments.

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
max_input_vars = 1500
date.timezone = America/Chicago

After making the change above, save the file and close out.

To test PHP 7.2 settings with Apache2, create a phpinfo.php file in Apache2 root directory by running the commands below

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Save the file. then browse to your server hostname followed by /phpinfo.php


You should see PHP default test page.

PHP 7.2 ubuntu nginx

Step 4: Create Snipe-IT Database

Now that you’ve install all the packages that are required, continue below to start configuring the servers. First create a Snipe-IT database.

Run the commands below to logon to MariaDB. When prompted for a password, type the root password you created above.

sudo mysql -u root -p

Then create a database called snipeit


Create a database user called snipeituser with new password

CREATE USER 'snipeituser'@'localhost' IDENTIFIED BY 'new_password_here';

Then grant the user full access to the snipeit database.

GRANT ALL ON snipeit.* TO 'snipeituser'@'localhost' WITH GRANT OPTION;

Finally, save your changes and exit.


Step 5: Download Snipe-IT Latest Release

To get Snipe-IT latest release you may want to use Github repository. Install Composer, Curl and other dependencies to get started.

sudo apt install curl git
curl -sS | sudo php -- --install-dir=/usr/local/bin --filename=composer

After installing curl and Composer above, change into the Apache2 root directory and download Snipe-IT packages from Github.

cd /var/www/
sudo git clone snipeit
sudo cp /var/www/snipeit/.env.example /var/www/snipeit/.env

Next, edit the .env file create above and make the highlighted changes to suit your environment.

sudo nano /var/www/snipeit/.env

Make the highlighted changes.

# --------------------------------------------
# --------------------------------------------

# --------------------------------------------
# --------------------------------------------

# --------------------------------------------

Save the file and exit.

Next, go back to Snipe-IT root directory and update all packages via Composer.

cd /var/www/snipeit
sudo composer install --no-dev --prefer-source

From Snipe-IT directory, run the commands below:

sudo php artisan key:generate

It should prompt and show you an application key.

*     Application In Production!     *

 Do you really wish to run this command? (yes/no) [no]:
 > yes

Application key [base64:6KnX/HGkNNcUGw2uucxBKT8+OwQ58yBp7vfa7sfwpDg=] set successfully.

Since you just ran the web server as root, you should make sure any newly created files are owned by the www-data user and group.

To do that, run the commands below:

sudo chown -R www-data:www-data /var/www/snipeit/
sudo chmod -R 755 /var/www/snipeit/

Step 6: Configure Apache2

Finally, configure Apahce2 site configuration file for Snipe-IT. This file will control how users access Snipe-IT content. Run the commands below to create a new configuration file called snipeit.conf

sudo nano /etc/apache2/sites-available/snipeit.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

<VirtualHost *:80>
     DocumentRoot /var/www/snipeit/public

     <Directory /var/www/snipeit/public/>
        Options +FollowSymlinks
        AllowOverride All
        Require all granted

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined


Save the file and exit.

Step 7: Enable the Snipe-IT and Rewrite Module

After configuring the VirtualHost above, enable it by running the commands below

sudo a2ensite snipeit.conf
sudo a2enmod rewrite
sudo systemctl restart apache2.service

Then open your browser and browse to the server domain name or hostname. This is often localhost but can be a host name or IP address. Your server admin or hosting company will have this information available.

Continue with the installation wizard and validate that all requirements are met and continue.

Snipe-IT Ubuntu Setup

Next, create a system admin account to manage the platform.

Snipe-IT Ubuntu Install

After installing, login and start begin managing your IT assets.

Snipe-IT Ubuntu Install


You have learned how to install Snipe-IT on Ubuntu with Apache2 HTTP server. If you find any errors above, please leave a comment below


You may also like the post below:


  1. Hi,,

    After following all the instructions and without error, I cannot get to open the Setup Page.It says “Not Found. The requested URL was not found on this server. ”

    any missing Command or wrong configuration?
    thank you.

    1. I got the same thing. Working on a solution.

      1. any solution? I got the same thing

        1. The workaround that did the trick for me was editing the default apache conf files (000-default.conf and default-ssl.conf) and adding the following:

          AllowOverride All

          Reason being that went testing .htaccess (putting in junk) did not cause a website crash so that meant it wasn’t even being read. I also changed the DocumentRoot in both to reflect the snipeit path.

          Now everything works.

  2. Akash Sivakumar

    After the command “sudo a2ensite snipeit.conf”
    Add a command “sudo a2dissite 000-default.conf” to disable the dafault page of apache.

  3. Couldn’t get the key generate when running sudo php artisan key:generate, i check the openssl is already install on php. So not sure what else is missing. It doesnt have the vendor folder and it just say failed to open stream.

  4. When I reached the part “sudo composer install –no-dev –prefer-source” I got the below error.

    [sudo] password for snipeit:
    Do not run Composer as root/super user! See for details
    Continue as root/super user [yes]?
    Installing dependencies from lock file
    Verifying lock file contents can be installed on current platform.
    Warning: The lock file is not up to date with the latest changes in composer.json. You may be getting outdated dependencies. It is recommended that you run `composer update` or `composer update `.
    Your lock file does not contain a compatible set of packages. Please run composer update.

    Problem 1
    – adldap2/adldap2 is locked to version v10.3.1 and an update of this package was not requested.
    – adldap2/adldap2 v10.3.1 requires ext-ldap * -> it is missing from your system. Install or enable PHP’s ldap extension.

    To enable extensions, verify that they are enabled in your .ini files:
    – /etc/php/7.4/cli/php.ini
    – /etc/php/7.4/cli/conf.d/10-mysqlnd.ini
    – /etc/php/7.4/cli/conf.d/10-opcache.ini
    – /etc/php/7.4/cli/conf.d/10-pdo.ini
    – /etc/php/7.4/cli/conf.d/15-xml.ini
    – /etc/php/7.4/cli/conf.d/20-bcmath.ini
    – /etc/php/7.4/cli/conf.d/20-calendar.ini
    – /etc/php/7.4/cli/conf.d/20-ctype.ini
    – /etc/php/7.4/cli/conf.d/20-curl.ini
    – /etc/php/7.4/cli/conf.d/20-dom.ini
    – /etc/php/7.4/cli/conf.d/20-exif.ini
    – /etc/php/7.4/cli/conf.d/20-ffi.ini
    – /etc/php/7.4/cli/conf.d/20-fileinfo.ini
    – /etc/php/7.4/cli/conf.d/20-ftp.ini
    – /etc/php/7.4/cli/conf.d/20-gd.ini
    – /etc/php/7.4/cli/conf.d/20-gettext.ini
    – /etc/php/7.4/cli/conf.d/20-gmp.ini
    – /etc/php/7.4/cli/conf.d/20-iconv.ini
    – /etc/php/7.4/cli/conf.d/20-intl.ini
    – /etc/php/7.4/cli/conf.d/20-json.ini
    – /etc/php/7.4/cli/conf.d/20-mbstring.ini
    – /etc/php/7.4/cli/conf.d/20-mysqli.ini
    – /etc/php/7.4/cli/conf.d/20-pdo_mysql.ini
    – /etc/php/7.4/cli/conf.d/20-phar.ini
    – /etc/php/7.4/cli/conf.d/20-posix.ini
    – /etc/php/7.4/cli/conf.d/20-readline.ini
    – /etc/php/7.4/cli/conf.d/20-shmop.ini
    – /etc/php/7.4/cli/conf.d/20-simplexml.ini
    – /etc/php/7.4/cli/conf.d/20-sockets.ini
    – /etc/php/7.4/cli/conf.d/20-sysvmsg.ini
    – /etc/php/7.4/cli/conf.d/20-sysvsem.ini
    – /etc/php/7.4/cli/conf.d/20-sysvshm.ini
    – /etc/php/7.4/cli/conf.d/20-tokenizer.ini
    – /etc/php/7.4/cli/conf.d/20-xmlreader.ini
    – /etc/php/7.4/cli/conf.d/20-xmlrpc.ini
    – /etc/php/7.4/cli/conf.d/20-xmlwriter.ini
    – /etc/php/7.4/cli/conf.d/20-xsl.ini
    – /etc/php/7.4/cli/conf.d/20-zip.ini
    You can also run `php –ini` inside terminal to see which files are used by PHP in CLI mode.

    1. You need to manually install the php-ldap version for your version of php, so it would be php7.4-ldap (sudo apt install php7.4-ldap)

  5. Not Found
    The requested URL was not found on this server.

    Apache/2.4.29 (Ubuntu) Server at Port 80

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.