Install Mono CMS on Ubuntu 16.04 / 18.04 with Apache2 and PHP 7.2

Mono CMS offers a clean and minimalistic approach to content management system… Built with PHP and no database requirement, this CMS platform lets you built great websites for personal and professional use..

If you looking for a flat-file CMS platform that is easy to install, simple to maintain and flexible, then you should be looking at Mono CMS… With Mono CMS, you get a simple and fast editor for creating posts, clean design and lightweight..

This CMS platform is fast and gives webmasters extensible features to collaborate and automate engaging experiences with users across multiple devices, including mobile…

For more about Mono CMS, please check their Homepage

This brief tutorial is going to show students and new users how to install Mono CMS on Ubuntu 16.04 / 18.04 LTS…

To get started with installing Mono CMS, follow the steps below:

Step 1: Install Apache2 HTTP Server

Mono CMS requires a web server and Apache2 HTTP server is the most popular open source web server available today… To install Apache2 server, run the commands below:

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can be used to stop, start and enable Apache2 service to always start up with the server boots…

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

Now that Apache2 is installed…. to test whether the web server is working, open your browser and browse to the URL below…

http://localhost

Apache2 Test Page

If you see the page above, then Apache2 is successfully installed…

Step 2: Install PHP 7.2 and Related Modules

Mono CMS is a PHP based CMS and PHP is required… However, PHP 7.2 may not be available in Ubuntu default repositories… To run PHP 7.2 on Ubuntu 16.04 and previous, you may need to run the commands below:

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-mysql php7.2-gmp php7.2-curl php7.2-intl php7.2-mbstring php7.2-xmlrpc php7.2-gd php7.2-xml php7.2-cli php7.2-zip

After installing PHP 7.2, run the commands below to open PHP default configuration file for Apache2…

sudo nano /etc/php/7.2/apache2/php.ini

The lines below is a good settings for most PHP based CMS… Update the configuration file with these and save….

file_uploads = On
allow_url_fopen = On
short_open_tag = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

Everytime you make changes to PHP configuration file, you should also restart Apache2 web server… To do so, run the commands below:

sudo systemctl restart apache2.service

Now that PHP is installed, to test whether it’s functioning, create a test file called phpinfo.php in Apache2 default root directory…. ( /var/www/html/)

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Next, open your browser and browse to the server’s hostname or IP address followed by phpinfo.php

http://localhost/phpinfo.php

You should see PHP default test page…

PHP Test Page

Step 3: Download Mono CMS Latest Release

To get Mono CMS latest release you may want to go and download from its download page… Or use the commands below to use wget and get it downloaded…

Once downloaded extract the downloaded content into the newly created Mono CMS directory….

cd /tmp
wget http://monocms.com/MonoCMS.zip
sudo mkdir /var/www/html/monocms
unzip MonoCMS -d /var/www/html/monocms

Next, run the commands below to set the correct permissions for Mono CMS root directory and give Apache2 control….

sudo chown -R www-data:www-data /var/www/html/monocms/
sudo chmod -R 755 /var/www/html/monocms/

Step 4: Configure Apache2

Finally, configure Apache2 site configuration file for Mono CMS. This file will control how users access Mono CMS content. Run the commands below to create a new configuration file called monocms.conf

sudo nano /etc/apache2/sites-available/monocms.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

<VirtualHost *:80>
     ServerAdmin admin@example.com
     DocumentRoot /var/www/html/monocms
     ServerName example.com
     ServerAlias www.example.com

     <Directory /var/www/html/monocms/>
          Options FollowSymlinks
          AllowOverride All
          Require all granted
     </Directory>

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>

Save the file and exit.

Step 5: Enable the Mono CMS and Rewrite Module

After configuring the VirtualHost above, enable it by running the commands below

sudo a2ensite monocms.conf
sudo a2enmod rewrite
sudo systemctl restart apache2.service

Then open your browser and browse to the server domain name to bring up Mono CMS portal…

http://example.com

Mono CMS Ubuntu Install

When you first upload Monocms, you must change the password and username but you don’t have to do that if you just want to transfer from a directory to another.

To change password, you must login using the default username and password and then you can change your password from the settings page and your username from the accounts management page.

Congratulation! You have successfully installed Mono CMS on Ubuntu 16.04 / 18.04….

You may also like the post below:

How to Setup Drupal with Apache2 and Cloudflare CDN / SSL on Ubuntu 16.04 / 18.04

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.