Install Kirby CMS on Ubuntu 16.04 / 18.04 / 18.10 with Apache2, PHP 7.2 Support

Kirby is a flat file Content Management System (CMS) with no database involved…. It helps you create your personal or business websites in minutes just by uploading its content to your server….. Kirby CMS offers features that may not be available to other PHP based CMS, like WordPress Joomla or Drupal…

For one, it doesn’t need a database server, all its data is simply stored in the file system (file-based, flat file CMS)…. It also provides native mark down WYSIWYG support, SEO friendly, flexible CSS framework with no installation required…

For more about Kirby, please check it homepage

This brief tutorial shows students and new users how to install Kirby on Ubuntu 16.04 / 18.10 / 18.04 LTS with Apache2 and PHP 7.2 support….

When you’re ready to get Kirby working, continue with the steps below:

Step 1: Install Apache2 HTTP Server on Ubuntu

Apache2 HTTP Server is the most popular web server in use… so install it, since Kirby needs it..

To install Apache2 HTTP on Ubuntu server, run the commands below…

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can be used to stop, start and enable Apache2 service to always start up with the server boots.

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

To test Apache2 setup, open your browser and browse to the server hostname or IP address and you should see Apache2 default test page as shown below.. When you see that, then Apache2 is working as expected..

http://localhost

apache2 ubuntu install

Step 2: Install PHP 7.2 and Related Modules

PHP 7.2 may not be available in Ubuntu default repositories for some systems…. if you need it, you will have to get it from third-party repositories.

Run the commands below to add the below third party repository to upgrade to PHP 7.2

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-mbstring php7.2-xmlrpc php7.2-sqlite3 php7.2-soap php7.2-gd php7.2-xml php7.2-cli php7.2-curl php7.2-zip

After installing PHP 7.2, run the commands below to open PHP default config file for Apache2…

sudo nano /etc/php/7.2/apache2/php.ini

Then make the changes on the following lines below in the file and save. The value below are great settings to apply in your environments.

file_uploads = On
allow_url_fopen = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

After making the change above, save the file and close out.

Step 3: Restart Apache2

After installing PHP and related modules, all you have to do is restart Apache2 to reload PHP configurations…

To restart Apache2, run the commands below

sudo systemctl restart apache2.service

To test PHP 7.2 settings with Apache2, create a phpinfo.php file in Apache2 root directory by running the commands below

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Save the file.. then browse to your server hostname followed by /phpinfo.php

http://localhost/phpinfo.php

You should see PHP default test page…

PHP 7.2 ubuntu nginx

Step 4: Download Kirby Latest Release

Next, visit Kirby site and download the latest package…. or run the commands below to download Kirby packages from github….

After downloading, run the commands below to extract the downloaded file and move it into a new Kirby root directory. After that, change into Kirby root directory to install PHP required packages…

Take notes of the branch number… if there are newer branch number, replace the one below with it…

cd /var/www/html/
sudo apt install git
sudo git clone --recursive https://github.com/getkirby/starterkit.git kirby

Then run the commands below to set the correct permissions for Kirby to function properly.

sudo chown -R www-data:www-data /var/www/html/kirby/
sudo chmod -R 755 /var/www/html/kirby/

Step 5: Configure Apache2 Kirby Site

Finally, configure Apache2 configuration file for Kirby. This file will control how users access Kirby content. Run the commands below to create a new configuration file called kirby.conf

sudo nano /etc/apache2/sites-available/kirby.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

<VirtualHost *:80>
     ServerAdmin admin@example.com
     DocumentRoot /var/www/html/kirby/
     ServerName example.com
     ServerAlias www.example.com

     <Directory /var/www/html/kirby/>
          Options FollowSymlinks
          AllowOverride All
          Require all granted
     </Directory>

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined
    
     <Directory /var/www/html/kirby/>
            RewriteEngine on
            RewriteBase /
            RewriteCond %{REQUEST_FILENAME} !-f
            RewriteCond %{REQUEST_FILENAME} !-d
            RewriteRule ^panel/(.*) panel/index.php [L]
    </Directory>

</VirtualHost>

Save the file and exit.

After configuring the VirtualHost above, enable it by running the commands below

Step 6: Enable the Kirby Site and Rewrite Module

After configuring the VirtualHost above, enable it by running the commands below, then restart Apache2 server…

sudo a2ensite kirby.conf
sudo a2enmod rewrite

Restart Apache2

sudo systemctl restart apache2.service

Next, open your browser and browse to the server hostname or IP address and you should see Kirby page…

http://example.com

Kirby CMS ubuntu Install

Kirby is a databaseless flat file content management system… It’s structure allowed you to have just the amount of functionality you needed in a flat file CMS solution, adding extensions (blade packs) for further functionality, whilst allowing setup on simple servers with no database….

To logon to the backend panel, go to the address below:

http://example.com/panel/install

You’ll be prompted to create a new admin account….

Kirby CMS ubuntu setup

You should be able to logon with the username and password you created…

Ubuntu Kirby Install

After creating the first admin account, you can return to the backend by using the URL below:

http://example.com/panel/login

Enjoy!

Conclusion:

You have successfully installed Kirby CMS on Ubuntu 16.04 / 18.04 and 18.10… For more tutorials on Ubuntu please search our site…

You may also like the post below:

How to Install Jenkins Automation Server on Ubuntu 16.04 / 18.04 / 18.10

One Reply to “Install Kirby CMS on Ubuntu 16.04 / 18.04 / 18.10 with Apache2, PHP 7.2 Support”

  1. Tried this step:
    cd /var/www/html/
    sudo apt install git
    sudo git clone –recursive https://github.com/getkirby/starterkit.git kirby

    It did not work. Came back with a prompt for a github username and password. So, the instructions need to be updated to reflect that this is needed prior to completing the procedure. or a username and password need to be provided in the instructions

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: