Install CMSimple_XH on Ubuntu 16.04 / 18.04 / 18.10 with Apache2 and PHP 7.2

CMSimple_XH is an open source,  flat file Content Management System (CMS) that can help you create your personal or business websites in minutes without a separate database server…. It offers features that may not be available to other PHP based CMS, like WordPress Joomla or Drupal…

For one, it doesn’t need a database server, all its data is simply stored in the file system (file-based, flat file CMS)…. It also provides native markdown WYSIWYG support, SEO friendly, flexible CSS framework with no installation required…

For more about CMSimple_XH, please check it homepage

This brief tutorial shows students and new users how to install CMSimple_XH on Ubuntu 16.04 / 18.10 / 18.04 LTS with Apache2 and PHP 7.2 support….

When you’re ready to get CMSimple_XH working, continue with the steps below:

Step 1: Install Apache2 HTTP Server on Ubuntu

Apache2 HTTP Server is the most popular web server in use… so install it, since CMSimple_XH needs it..

To install Apache2 HTTP on Ubuntu server, run the commands below…

sudo apt update
sudo apt install apache2

After installing Apache2, the commands below can be used to stop, start and enable Apache2 service to always start up with the server boots.

sudo systemctl stop apache2.service
sudo systemctl start apache2.service
sudo systemctl enable apache2.service

To test Apache2 setup, open your browser and browse to the server hostname or IP address and you should see Apache2 default test page as shown below.. When you see that, then Apache2 is working as expected..

http://localhost

apache2 ubuntu install

Step 2: Install PHP 7.2 and Related Modules

PHP 7.2 may not be available in Ubuntu default repositories for some systems…. if you need it, you will have to get it from third-party repositories.

Run the commands below to add the below third party repository to upgrade to PHP 7.2

sudo apt-get install software-properties-common
sudo add-apt-repository ppa:ondrej/php

Then update and upgrade to PHP 7.2

sudo apt update

Next, run the commands below to install PHP 7.2 and related modules.

sudo apt install php7.2 libapache2-mod-php7.2 php7.2-common php7.2-mbstring php7.2-xmlrpc php7.2-sqlite3 php7.2-soap php7.2-gd php7.2-xml php7.2-cli php7.2-curl php7.2-zip

After installing PHP 7.2, run the commands below to open PHP default config file for Apache2…

sudo nano /etc/php/7.2/apache2/php.ini

Then make the changes on the following lines below in the file and save. The value below are great settings to apply in your environments.

file_uploads = On
allow_url_fopen = On
memory_limit = 256M
upload_max_filesize = 100M
max_execution_time = 360
date.timezone = America/Chicago

After making the change above, save the file and close out.

Step 3: Restart Apache2

After installing PHP and related modules, all you have to do is restart Apache2 to reload PHP configurations…

To restart Apache2, run the commands below

sudo systemctl restart apache2.service

To test PHP 7.2 settings with Apache2, create a phpinfo.php file in Apache2 root directory by running the commands below

sudo nano /var/www/html/phpinfo.php

Then type the content below and save the file.

<?php phpinfo( ); ?>

Save the file.. then browse to your server hostname followed by /phpinfo.php

http://localhost/phpinfo.php

You should see PHP default test page…

PHP 7.2 ubuntu nginx

Step 4: Download CMSimple_XH Latest Release

Next, visit CMSimple_XH site and download the latest package…. or run the commands below to download CMSimple_XH pckages from github….

After downloading, run the commands below to extract the downloaded file and move it into a new CMSimple_XH root directory. After that, change into CMSimple_XH root directory to install PHP required packages…

Take notes of the branch number… if there are newer branch number, replace the one below with it…

cd /var/www/html/
sudo apt install git
sudo git clone --branch 1.7 https://github.com/cmsimple-xh/cmsimple-xh.git cmsimplexh
cd /var/www/html/cmsimplexh
sudo composer install

Then run the commands below to set the correct permissions for CMSimple_XH to function properly.

sudo chown -R www-data:www-data /var/www/html/cmsimplexh/
sudo chmod -R 755 /var/www/html/cmsimplexh/

Step 5: Configure Apache2 CMSimple_XH Site

Finally, configure Apache2 configuration file for CMSimple_XH. This file will control how users access CMSimple_XH content. Run the commands below to create a new configuration file called cmsimplexh.conf

sudo nano /etc/apache2/sites-available/cmsimplexh.conf

Then copy and paste the content below into the file and save it. Replace the highlighted line with your own domain name and directory root location.

<VirtualHost *:80>
     ServerAdmin admin@example.com
     DocumentRoot /var/www/html/cmsimplexh/
     ServerName example.com
     ServerAlias www.example.com

     <Directory /var/www/html/cmsimplexh/>
          Options FollowSymlinks
          AllowOverride All
          Require all granted
     </Directory>

     ErrorLog ${APACHE_LOG_DIR}/error.log
     CustomLog ${APACHE_LOG_DIR}/access.log combined

</VirtualHost>

Save the file and exit.

After configuring the VirtualHost above, enable it by running the commands below

Step 6: Enable the CMSimple_XH Site and Rewrite Module

After configuring the VirtualHost above, enable it by running the commands below, then restart Apache2 server…

sudo a2ensite cmsimplexh.conf
sudo a2enmod rewrite

Restart Apache2

sudo systemctl restart apache2.service

Next, open your browser and browse to the server hostname or IP address and you should see CMSimple_XH page… Login and change your password…

http://example.com

CMSimpleXH Ubuntu Install

CMSimple_XH is a databaseless flat file content management system… It’s structure allowed you to have just the amount of functionality you needed in a flat file CMS solution, adding extensions (blade packs) for further functionality, whilst allowing setup on simple servers with no database….

To make changes to the system at all, you’ll have to log in. To do this, go to example.com/?&login at the bottom. (The login link is usually placed in the footer.) The standard password is set to test. By doing this you reach the admin mode, sometimes called “backend”.

http://example.com/?&login

Use the temporary password test

The administration menu (Admin menu) is CMSimple_XH’s control center. After logging in a dark bar is displayed at the top of the screen.

At first you’ll have to change the default password:

Admin menu ⇒ Settings ⇒ Password

Always change the default password first! This is the most important step to prevent unauthorized access to the CMS….

The most important place to do that is:

Admin menu ⇒ Settings ⇒ Configuration

Here you should activate the contact form. Enter your e-mail address (section mailform) and select your preferred language for the backend. You should also check all the other settings.

Admin menu ⇒ Settings ⇒ Language

Here, only the first three points are important at the beginning: Site title and the two meta-specifications for search engines. Those and all other settings can be modified at any time.

Enjoy!

You may also like the post below:

MariaDB 10.3.10 Has Been Released — Here’s How to Install / Upgrade on Ubuntu 16.04 / 18.04 / 18.10